Ava Romero
Hillbilly Golf, also known as Ladder Golf or Hillbilly Horseshoes, is a fun outdoor game that can be easily made at home. The game involves two ladders and bolas, which are golf balls attached to a piece of rope. The objective is to score 21 points by successfully landing the bolas on the rungs of the ladder, with the top rung worth 2 points, the middle worth 3, and the bottom worth 1. Players can also try to knock off their opponent's bolas to prevent them from scoring. The game can be made for under $30 using PVC pipes, golf balls, nylon rope, and a few basic tools. The process is simple and can be completed in a few hours, providing a fun and inexpensive activity for parties or gatherings.
| Characteristics | Values |
|---|---|
| Other Names | Ladder Golf, Hillbilly Horseshoes, Ladder Ball |
| Equipment | PVC pipe, PVC cement, nylon rope, golf balls, spray paint, drill, scissors, saw, tape measure, lighter |
| Rules | Opponents try to score points by hanging their golf balls on the ladder. The top bar is 2 points, the middle is 3 points, and the bottom is 1 point. Players can also try to knock off their opponent's golf balls to prevent them from scoring. The game is played to 21 points. |
| Cost | Under $30 to make at home |
Explore related products
What You'll Learn
Cut the PVC pipe
To put together a Hillbilly Golf set, you will need a few things, including a saw, PVC pipes, and some other materials. The first step in assembling your own Hillbilly Golf set is to cut the PVC pipe to size.
It is recommended to use a circular saw when cutting the PVC pipe, as the blade is thinner than that of a miter saw. You will need to cut the PVC pipe into several pieces of specific lengths. First, cut three pieces of the PVC pipe to a length of 2 feet each. These 2-foot pipes will serve as the base of your golf set.
Next, you will need to cut six 1-foot pipes. These shorter pipes will be attached to the T-joints and elbow joints to form the structure of your Hillbilly Golf set. Make sure to cut the pipes accurately to ensure a stable and secure fit when assembling the pieces together.
After cutting the 1-foot pipes, you will need to cut additional 2-foot pipes. The exact number of these pipes required will depend on the specific design and size of your Hillbilly Golf set. Typically, you will need at least twelve 2-foot pipes for the base and vertical sections of the ladder-like structure.
It is important to handle the saw with caution and wear appropriate protective gear when cutting the PVC pipes. Take your time and ensure straight and precise cuts to make assembly easier and to achieve a sturdy final product. Once you have cut all the PVC pipes to the required lengths, you can move on to the next step of assembling your Hillbilly Golf set.
Golfing Cripple: How to Play with a Disability
You may want to see also
Explore related products
Assemble the frame
To assemble the frame for Hillbilly Golf, you will need 6 3/4 PVC T's, 6 3/4 PVC elbows, two 10-foot 3/4 PVC pipes, nylon rope, a drill, scissors, a saw, and a tape measure.
First, cut the PVC pipes. Cut 3 2-foot PVC pipes and then cut 6 1-foot PVC pipes. Attach two T's on both sides of each 2-foot pipe. Then, put 2 1-foot pipes on the T's. Add two more 1-foot pipes on the Ts. Then, add 2 more Ts with a 2-foot pipe connecting them. Get two elbows and put them on a 2-foot pipe, and connect them together.
Before putting the pieces together, apply a small amount of PVC cement inside each joint immediately before attaching it to the appropriate piece of PVC. Be mindful that you will only have a second or two to line the joint up to mirror the opposite end before it dries. Lay the pieces flat on the cement to make sure they are completely level and adjust if necessary.
Once the frame is assembled, you can move on to creating the bolas. Spray paint the golf balls and, once the paint dries, drill holes through the center of each golf ball. Cut the nylon rope to about 20 inches and thread one end through a golf ball, tying a knot on the other side to secure it. Snip off any extra rope and burn the edge to seal it. Repeat this process to make 6 bolas in total.
Golf Galaxy Website: What's Happening?
You may want to see also
Explore related products
Thread the rope
To thread the rope for Hillbilly Golf, you will need nylon rope, golf balls, a drill, scissors, a tape measure, and a lighter.
First, cut the nylon rope to about 20 inches. Then, use the drill to make a hole in the golf balls. To prevent the rope from fraying, burn the ends of the rope with a lighter. Thread the rope through the hole in the golf ball and knot it on the other side to secure it. Cut off any excess rope and burn the edge to seal it. Repeat this process for the remaining golf balls.
For the bola balls, thread one end of the rope through a golf ball and tie a knot on the other side. Snip off any extra rope and burn the edge to seal it. Repeat this step for the second golf ball, so you have a ball on each end of the rope. Make sure the balls are about 20 inches apart, and tie a knot at each end of the rope to secure them in place.
To make the game more challenging, you can create different coloured bola balls. For example, you can have six white golf balls and six coloured golf balls. This way, players can easily identify their bola balls during gameplay.
How to Fix an Overly Steep Golf Downswing
You may want to see also
Explore related products
Secure the golf balls
To secure the golf balls, you will need a drill, nylon rope, scissors, a tape measure, and a lighter. First, cut the nylon rope to about 20 inches in length. Next, use the drill to make a hole in each of the golf balls. The drill bit should be slightly larger than your rope to ensure the rope fits through the hole in the golf ball. Thread one end of the rope through the hole in the golf ball and tie a knot on the other side of the ball to secure it in place. Repeat this process for all six golf balls. Once the knots are tied, use scissors to snip off any excess rope. To prevent the rope from fraying, carefully burn the ends of the rope with a lighter.
Golf Outings: Business or Entertainment?
You may want to see also
Play the game
Hillbilly Golf, also known as Ladder Golf, is a fun outdoor game that can be played with two or more people. It is simple to make and even simpler to play.
To play the game, you need to assemble the 'ladder' structure, which is made from PVC pipes. The ladder should have three rungs, with the bottom rung being the closest to the ground. The rungs are worth different points, with the top rung being worth 2 points, the middle worth 3, and the bottom worth 1.
The aim of the game is to be the first player to reach 21 points. To score points, players throw their bolas—a piece of rope with a golf ball at each end—and try to get them to land on a rung. If the bola lands on a rung, the player scores the corresponding points. If it doesn't land on a rung, the player doesn't score any points. Players can also try to knock off their opponent's bolas to prevent them from scoring. If both players' bolas land on the same rung, both players' scores for that round are cancelled out.
For example, if Player A's bola lands on the middle rung, they score 3 points. However, if Player B's bola also lands on the middle rung, both players' scores are cancelled out for that round. The game continues until one player reaches 21 points exactly. It is important to note that if a player goes over 21 points, their score will be adjusted accordingly. For instance, if a player has 19 points and then scores 3 points, those 3 points will be subtracted from their total, bringing their score down to 16.
Golf R: ULEZ-Compliant Performance
You may want to see also
Frequently asked questions
You will need 6 3/4 PVC T's, 6 3/4 PVC Elbows, two 10-foot 3/4 PVC pipes, nylon rope, golf balls, scissors, a drill, a saw, and a tape measure.
Cut the nylon rope to about 20 inches. Drill a hole in the golf balls and thread the rope through, tying a knot on the other side to secure it. Burn the edges of the rope so they don't fray.
Cut 3 2-foot PVC pipes and 6 1-foot PVC pipes. Attach two T's on both sides of the 2-foot pipe. Put 2 1-foot pipes on the T's, then add two more 1-foot pipes. Add 2 more T's with a 2-foot pipe connecting them. Get two elbows and put them on a 2-foot pipe.
You and your opponent try to score points. The top bar is 2 points, the middle is 3 points, and the bottom is 1 point. You play to 21. Your opponent can try to knock off your golf balls to prevent you from scoring points. If you both get the same bar, it cancels out both of your points. You have to get exactly 21 to win.
