Harper Lin
If your golf jacket is no longer repelling water, it may be time to re-waterproof it. There are two common ways to re-waterproof a jacket: the wash-in method and the spray-on method. For the wash-in method, you will need a waterproofing liquid, such as Nikwax TX Direct Wash-In Waterproofer, and a washing machine or basin to wash by hand. For the spray-on method, you will need a waterproofing spray, such as Nikwax TX Direct Spray-On Waterproofer, a hanger, and a cloth. It is important to wash your jacket before re-waterproofing it to remove any dirt or oil, which can affect the jacket's ability to repel water. Additionally, always refer to the fabric type and product care instructions before re-waterproofing your jacket.
Explore related products
What You'll Learn
Wash your jacket with a specialist performance cleaner
When it comes to re-waterproofing your golf jacket, it's essential to start with a clean jacket to ensure the process works effectively. Regular detergents can damage the waterproof membrane of your jacket, so it's crucial to opt for a specialist performance cleaner designed for technical outerwear. These cleaners are formulated to gently remove dirt, oils, and grime without compromising the water-repellent coating.
There are several recommended cleaners specifically designed for waterproof fabrics. One popular option is Nikwax, which offers a range of products like Tech Wash, TX Direct Wash-In Waterproofer, and TX Direct Spray-On Waterproofer. Nikwax has a strong reputation in the outdoor aftercare industry, and its products are known for being water-based and PFAS-free. Another suggested cleaner is Grangers, which offers a selection of outdoor gear cleaning products.
If you're looking for a liquid waterproofing solution, Storm is a recommended option. Storm Clothing Wash is a pH-neutral detergent that helps improve water repellency and restore breathability to your jacket. It's important to follow the instructions on the cleaner bottle for the correct amount, but generally, one capful is sufficient for a single jacket.
When using a specialist cleaner, it's advisable to set your washing machine to a gentle cycle with cold or lukewarm water, typically around 30°C. Avoid hot water as it can damage the waterproof membrane. Make sure to give your jacket a thorough rinse after washing, as any leftover cleaner can negatively impact its performance. For added assurance, consider running an extra rinse cycle.
After washing, drying your jacket properly is crucial. Tumble drying on low heat is recommended, as it can help reset the Durable Water Repellent (DWR) coating. If tumble drying is not an option, you can hang your jacket outside to air dry, but be sure to avoid direct sunlight. It's important to note that ironing or using a radiator for drying can damage the DWR coating.
TaylorMade PreOwned: Legit or Scam?
You may want to see also
Explore related products
$56.84 $59.84
Use a waterproofing spray
If your golf jacket is absorbing water instead of repelling it, it's time to re-waterproof it. One way to do this is by using a waterproofing spray.
Firstly, ensure your jacket is clean. Dirt and oil can clog the breathable membrane in waterproof jackets, making it seem like water is penetrating the fabric. Use a specialist performance cleaner or a soap solution, rather than normal detergent. Then, prepare your jacket by emptying the pockets and fastening any zips and drawcords.
Next, hang your jacket on a washing line or clothes hanger. Spray the waterproofing product evenly on the outside of the jacket from approximately 15-20 cm away. Check the jacket carefully to ensure full coverage, and apply a second coat to high abrasion areas such as the elbows and shoulders. Wipe away any excess spray with a clean cloth.
Finally, allow the jacket to dry naturally, or tumble dry on a low heat if the fabric allows.
Some recommended waterproofing sprays include Nikwax, Fabsil, and Storm.
Golf Scramble: Teamwork Makes the Dream Work
You may want to see also
Explore related products
Try the Nikwax wash-in and spray-on method
To re-waterproof your golf jacket, you can try the Nikwax wash-in and spray-on method. This method is suitable for most jackets, but it is always good to check the fabric type and product care instructions before starting.
Cleaning the Jacket
First, you need to clean your jacket. Nikwax Tech Wash is a gentle cleaner that is suitable for both Gore-Tex and fleece. It is recommended to use this product before waterproofing. If your jacket has down fill, you can use Nikwax Down Wash Direct, which is specifically designed for down feathers.
Wash-In Method
The wash-in method is suitable for rain jackets, ski shells, and other hardshell outerwear without specific liners. To use this method, you will need Nikwax TX.Direct Wash-In Waterproofer. If you are using a washing machine, start by cleaning the detergent tray to remove any buildup. Then, place one or two items inside and wash on a 30°C synthetic cycle with a slow spin. Add 100ml of the TX.Direct product per item. Run another cycle with the same settings and dry the jacket outside on a hanger.
Spray-On Method
The spray-on method is ideal for hardshell jackets with liners made from varying fabrics, such as fleece, wool, or leather. It is also a good option if you want to control the treatment and apply it only to the outside of the jacket. For this method, you will need the Nikwax TX.Direct Spray-On Waterproofer, a hanger, and a cloth. After cleaning your jacket, hang it on a clothes hanger, making sure to fasten all zips and drawcords. Apply the spray evenly to all areas of the jacket, and then wipe away any excess product with a clean cloth. Allow the jacket to dry naturally or tumble dry on low heat if the fabric allows.
Additional Tips
- It is important to clean your waterproof jacket regularly to maintain its waterproofing and breathability. Dirt, oil, sunscreen, and sweat can build up over time, affecting the jacket's performance.
- When washing your jacket, avoid using regular detergents or washing machine powder, as these can ruin the waterproofing. Instead, opt for specialist cleaners designed for technical outerwear.
- Always test new products on a small, inconspicuous area of the fabric before applying them to the entire garment.
Golfing in Key West: Courses and More
You may want to see also
Explore related products
$23.19 $24.79
$42.97 $47.97
Wash your jacket before re-waterproofing
It is important to wash your golf jacket before re-waterproofing it. Dirt and oil can clog up the breathable membrane in many waterproof jackets, making it feel as though water is penetrating the fabric.
Before washing your jacket, it is important to prepare it. Brush off any visible dirt, mud, or debris. Close all zips or velcro and secure any flaps or loose ends. Check the pockets and ensure they are empty.
When washing your jacket, it is important to use a specialist performance cleaner designed for technical outerwear. Do not use everyday household detergents, as these can ruin the jacket. If you are unsure, check the label for washing instructions. You can also use a waterproof washing liquid for down or technical outerwear.
If you are using a washing machine, ensure that there is no soap build-up in the machine, as this can ruin the jacket. You can do this by running a quick rinse cycle before washing your jacket. Place your jacket in the machine, ideally washing one item at a time. Set the machine to 30°C with a slow spin cycle. If your jacket is particularly dirty, you can use a standard non-biological soap or a waterproof washing liquid to add extra protection.
If you are handwashing your jacket, use warm water and a soap solution. You can also use a specialist liquid such as NikWax or Storm.
Golf in Olympics: How Does It Work?
You may want to see also
Explore related products
Use a detergent to remove body oils and dirt
When reproofing a golf jacket, it is important to start with a clean jacket to ensure the process works effectively. Dirt, body oils, sunscreen, and other contaminants can degrade the durable water repellent (DWR) performance of your jacket. To remove these contaminants, you should use a detergent designed for technical gear or outerwear. Standard detergents can impact the DWR finish and lead to premature wetting out, where the exterior of the fabric looks wet, but the inside is dry.
To wash your jacket, first zip up all zippers and empty the pockets. If you are using a washing machine, it is recommended to use a front-loading washer instead of a top-loading machine, as jackets can get caught in the spindle of a top-loading machine, leading to tangling or tearing. If you do not have access to a washing machine, hand-washing is a great alternative.
When choosing a detergent, opt for a mild detergent made for technical gear (often called "waterproof detergent"). These detergents are pH-neutral and help maintain the function and durability of your jacket. Look for a water-based, biodegradable liquid detergent that is free of dyes, whiteners, brighteners, and fragrances. You can also use a detergent designed for sensitive skin, as these are gentle and safe for your gear.
Before washing your jacket, give the detergent tray a good scrub to remove any buildup in the machine. Then, follow these steps:
- First cycle: Wash one or two items at a time on a 30°C synthetic cycle with a slow spin. Add 100ml of a waterproofing product, such as Nikwax TX.Direct, per item.
- Second cycle: Run another 30°C synthetic cycle with a slow spin.
- Drying: Shake the jacket and hang it outside on a washing line to dry. Do not tumble dry, iron, or place on a radiator, as this can damage the DWR coating.
If your jacket has oil stains, you can pre-treat the stains before washing. Use an enzyme-based liquid detergent, such as Tide Ultra Stain Release Liquid, which is designed to lift oil stains from clothing. Apply the detergent to the stain, let it sit for a few minutes, then rinse with water and soak in warm or hot water for 30 minutes. Machine wash using your chosen detergent and the warmest water allowed by the care label. Repeat the process if necessary, then allow the jacket to air dry.
Golf Gear: Is Patriot Legit?
You may want to see also
Frequently asked questions
If the fabric of your jacket is absorbing water rather than repelling it, it's time to re-waterproof. You can test this by running it under a tap to see if water beads on the surface.
You can expect to get a season's worth of use from one treatment.
You can use a waterproofing spray or a wash-in waterproofer. Popular products include Gear Aid ReviveX Spray, Grangers Performance Repel Plus Spray, and Nikwax TX.Direct Spray, Wash-In Waterproofer, and Tech Wash.
First, ensure your jacket is clean, pockets emptied, and zips fastened. Hang your jacket on a washing line or clothes hanger and spray the product evenly on the outside of the coat from 15-20 cm away. Check the jacket carefully to ensure no areas have been missed and wipe off any excess with a clean cloth. Allow the jacket to dry naturally.
First, ensure your jacket is clean. If you are using a washing machine, run an empty cycle to clear out any soap residues, then wash your jacket with a specialist performance cleaner or a small amount of regular laundry detergent. Add 100ml of Nikwax TX.Direct per item and wash on a 30°C synthetic cycle with a slow spin. Hang your jacket on a washing line or clothes hanger to dry outside.
Note: Do not iron, tumble dry, or leave your jacket on a radiator as this can damage the Durable Water Repellent (DWR) coating.
