Trevor Ng
Volkswagen Golf Mk5 owners often seek to replace their seats with leather alternatives or sportier options from other VW models. Mk5 seats are interchangeable with those from the Mk6, with some electrical connections requiring adaptation. The front seats from a Mk6 can be fitted without issue, while the rear seats may be more challenging due to the presence of a cable inside the seat back. GTI seats are also a popular choice for Mk5 owners, but transferring the quick rear seat fold button can be difficult due to a cable inside the seat back. When installing GTI seats, the airbag module from the original seat must be swapped to prevent an airbag light error. Additionally, the driver's seat may not offer the same vertical adjustment range as the stock cloth seats.
| Characteristics | Values |
|---|---|
| Seat type | Leather, cloth, factory VW Recaro seats |
| Seat model | MK5, MK6, GT, GTI |
| Seat features | Bucket seats, sliding runner, fitting frame, power lumbar adjustment, airbag |
| Installation | Requires angle grinding/cutting metal, drilling holes, swapping plugs for seatbelt sensors |
| Compatibility | Compatible with VW Golf vans, MK5/MK6 interior pieces are interchangeable |
| Issues | Airbag errors, power lumbar not working, limited vertical adjustment range |
Explore related products
What You'll Learn
MK5 Golf seats are interchangeable with MK6 seats
When swapping MK5 Golf seats with MK6 seats, it is important to consider the compatibility of the electrical components. Some MK6 seats may have different plug configurations for the seatbelt sensor, which will need to be swapped to fit into the floor receptacle of the MK5. Additionally, the airbags on the passenger side may trigger an error, requiring additional steps to clear the airbag light. These issues can often be resolved by using a VagCom or disconnecting and reconnecting the battery terminals to discharge any residual voltage.
It is worth noting that the driver's seat in the MK6 may not have the same vertical adjustment range as the stock cloth seats in the MK5. The power lumbar adjustment may also be affected, with some people choosing to live without it or exploring re-coding options. The bolt thickness should also be considered, with thicker bolts providing a tighter fit for the seat base.
When installing MK5 or MK6 Golf seats, it is recommended to angle grind or cut small bits of metal from the runners to create a flat surface. Flat steel measuring 6mm x 30mm can be placed across the front and back of the base for a secure fit. Drilling four holes, two for attaching the steel to the base and two for the bar to the seat, is also necessary for a successful installation.
Overall, the MK5 and MK6 Golf share the same chassis, and their interior pieces are interchangeable. This includes not just the seats but also the dash and door cards. While some electrical adaptations may be needed, the physical fit is identical, making it possible to swap MK5 and MK6 Golf seats with some careful planning and adjustments.
Obama's Golfing Obsession During His First Term
You may want to see also
Explore related products
Leather seats can be installed in a 2008 Golf 2.0 TDI
There are a few things to keep in mind when exploring the option of installing leather seats in your 2008 Golf 2.0 TDI. Firstly, it is important to source compatible seats. Given the specificity of your model, it is recommended to seek out leather seats designed for the MK5 Golf or, more specifically, the 2008 Golf 2.0 TDI. This ensures that the seats will have the correct fittings and connections for your car.
Secondly, the process of installation should be carefully considered. While some individuals opt for professional installation, others choose to undertake the task themselves. If you decide to install the leather seats yourself, it is crucial to follow a comprehensive guide or seek advice from online forums dedicated to Volkswagen modifications. Proper installation ensures not only the aesthetic appeal of the leather seats but also the safety and functionality of the seats within your vehicle.
One of the critical aspects of installing leather seats in your 2008 Golf 2.0 TDI is addressing the airbags. As airbags are an essential safety feature, it is vital to ensure that they will still function properly after the seat upgrade. This may involve recoding the airbags and addressing potential differences in connectors or pinouts, depending on the year and model of the leather seats you source. It is recommended to seek guidance from experienced individuals or professionals when dealing with airbag-related matters.
Additionally, when installing leather seats, it is important to consider the comfort and support they provide. While the standard seats in the MK5 Golf are already renowned for their comfort, ensuring that your new leather seats offer comparable or improved comfort levels is essential. This may involve paying attention to features such as lumbar support and making sure that the seats provide adequate ergonomic benefits. By carefully selecting compatible leather seats and following the necessary installation procedures, you can successfully upgrade the interior of your 2008 Golf 2.0 TDI with style and comfort.
Mark Cuban's Golf Game: What's the Deal?
You may want to see also
Explore related products
Seats from a Golf GT MK5 can be installed in a van
If you are installing leather seats, you should be aware that the heated seat wiring may not work due to different heating elements. The airbag harness is the same if the MK5 seats are 08+. You will want to reuse the occupant sensor (grey box under the passenger side seat) from your Golf 2.5; otherwise, you will get an airbag light that won't go away.
If you are using bolts to install the seats, you may want to use genuine VW fitting bolts, which are thicker and provide a tighter fit down the sides of the seat base.
It is also worth noting that if you are installing seats from a 2-door GTI, the rear bench may not fit as well.
John Daly's Golfing Plans: What's Happening This Weekend?
You may want to see also
Explore related products
![[Upgrade] Liulbobu Wireless Carplay Car Radio for VW Passat Golf 5 6 Polo MK5 T5 Skoda Jetta Caddy EOS Touran Android Auto, 7 inch Bluetooth Double din Car Stereo for/FM/AM/USB/RDS/High Power](https://m.media-amazon.com/images/I/71Nm4OmQ8RL._AC_UL320_.jpg)
The driver's seat may need to be placed offset to the base
When fitting a new seat to your VW Golf Mk5, you may need to offset the driver's seat to the base. This is due to the holes in the seat runners and bolts on the seat base not lining up.
To begin the process of fitting a new seat, slide the seat all the way forward. Remove the two 10mm 12-point bolts on the bracket at the lower rear of the seat. Be careful to ensure that the 12-point bit is well-seated in the bolt, as you do not want to strip them.
Next, disconnect the ground strap from the negative terminal on the battery. You will be working on the airbag wiring connections, so allow the residual electricity to discharge from the vehicle for 15 minutes before proceeding.
Now, consider the bolt thickness. Some users have recommended using genuine VW fitting bolts, which are thicker and provide a tight fit down the sides of the seat base.
When it comes to the back bar, you may find it a bit more challenging as the holes in the runners and bolts on the seat base may not align perfectly. One approach is to use the holes one back from the mounting point of the runner. This will require offsetting the holes on the bars, but it will still provide a secure and aesthetically pleasing installation.
It is recommended to consult a professional or seek advice from experienced individuals who have performed similar installations to ensure a safe and proper fitment of the seats.
Justin Leonard's Golf Career: Retired or Still Playing?
You may want to see also
Explore related products
Electrical connections may need adapting for MK5/MK6 seats
When fitting aftermarket seats in your Volkswagen Golf MK5 or MK6, you may need to make some adjustments to the electrical connections. This is because the seats may have different wiring configurations, and the connectors may not match the original equipment.
For example, if you are installing leather seats with electrical adjustments, you will need to connect them to the car's electrical system. This may involve cutting and splicing wires, and possibly adding new connectors. You will need to ensure that the correct wires are connected to the correct pins on the seat connectors.
In some cases, you may need to source the correct wiring harness and connectors separately. For instance, if you are installing Audi B8/B9 seats in your Golf, you will need to reuse the original Audi wiring and connectors, as the pin configurations are different between Audi and VW. You may also need to retrofit a PODS sensor into the Audi seat bottom cushion.
Additionally, if your new seats have features such as heating or memory functions, you will need to ensure that the correct wires are connected to the appropriate modules in the car. For example, the black/white wire at Pin 4 on the female connector of a heated seat needs to go to the J774 Front Heated Seats Control Module. On the male side, the same wire can go to either the J301 A/C Control Module or the J255 Climatronic Control Module, depending on the type of climate control system in your car.
It is important to note that incorrect wiring can lead to issues such as short circuits or faulty airbag warning lamps. Therefore, it is recommended to refer to wiring diagrams specific to your car model and the donor seats, and to seek guidance from a qualified technician if you are unsure about the electrical connections.
Selecting a Golf Wedge: The Ultimate Guide
You may want to see also
Frequently asked questions
Yes, MK5 Golf seats are interchangeable. You can install leather seats in your 2008 Golf 2.0 TDI.
Yes, MK6 seats will fit in an MK5 Golf. The front seats can be swapped without any issues, but you may need to swap the plug for the seatbelt sensor on the driver's seat.
It is unclear whether MK6 rear seats will fit in an MK5 Golf. While some physical pieces are interchangeable, electrical connections may need adapting.
When fitting MK5 Golf seats, you may need to angle grind/cut small bits of metal from the runners to make them flat. Additionally, consider using thicker bolt thickness for a tighter fit.
When swapping seats, you may encounter issues with airbag lights and power lumbar adjustments. You may need to swap the airbag module or clear codes using a diagnostic tool.
![[Replacement] Car Sunglasses Glasses Holder Box Case For VW For Golf For MK5 For MK6 For Tiguan For Jetta For MK5 For Passat B6 For CC For Sharan For Skoda For Yeti For Superb For Seat 1KD868837 LFMGU](https://m.media-amazon.com/images/I/41aDgGEHlKL._AC_UL320_.jpg)
