Miles Bennett
Hemming a golf shirt is a useful skill to have, especially if you want a more comfortable and flattering fit. It can be done by hand or with a sewing machine, and there are a few simple steps to follow. First, turn the shirt inside out and mark the desired length. Then, cut the shirt to the desired length, allowing for a half-inch fold to create the new hem. Next, fold up the hem and press with an iron to secure it in place. Finally, sew the hem in place, using a zigzag or stretch stitch to create a hem with some stretch. This process can be adapted depending on the style and material of the shirt, and there are also shortcut methods such as using iron-on hem tape.
Characteristics and Values Table for Hemming a Golf Shirt
| Characteristics | Values |
|---|---|
| Marking the new length | Turn the shirt inside out and put it on. Use a dressmaker's chalk, dressmaker's pen, or a sewing pin to mark the new length. |
| Cutting the shirt | Cut the shirt 1/2 inch longer than the desired length. Use fabric scissors and cut along a parallel line to ensure uniformity. |
| Folding the hem | Fold the bottom hem by 1/2 inch to achieve the desired length. |
| Securing the hem | Use sewing pins to secure the hem. Alternatively, use iron-on hem tape by placing it inside the fold and ironing over it. |
| Sewing the hem | Sew by hand or using a sewing machine. Use a thread color that matches the shirt. Sew as close to the raw edge as possible, using a zigzag or stretch stitch. |
| Finishing | Press the hem with an iron on a suitable heat setting. Snip off any excess threads. |
Explore related products
What You'll Learn
Marking the new length
Turn the shirt inside out: Before marking the new length, turn your shirt inside out. This will make it easier to mark and cut the fabric accurately.
Determine the desired length: Decide how much shorter you want your shirt to be. You can do this by putting the shirt on and determining the ideal length, or by laying the shirt flat and measuring the desired amount to cut off. Remember to consider the type of hem you plan to create, as this will affect the total length removed. For example, a half-inch fold-up hem will require cutting the shirt half an inch longer than the desired final length.
Mark the new length: Using dressmaker's chalk, a washable fabric marker, or a sewing pen, mark the new length on the inside of the shirt. Draw a straight line across the bottom of the shirt, ensuring it is parallel to the original hem. You can use a ruler or measuring tape to help guide your marking, ensuring a straight and even line. If you are wearing the shirt while marking, you can use sewing pins to mark the new length.
Remove the shirt and lay it flat: Once you have marked the new length, take off the shirt and lay it flat on a table or ironing board. Make sure the shirt is spread out smoothly, without any creases or bumps that could affect the accuracy of your cutting.
Cut the shirt: Using sharp fabric scissors, carefully cut along the marked line. Try to cut in a smooth, steady motion, ensuring a straight and even cut. It is important to use fabric scissors designed for this purpose, as they will provide a cleaner cut and reduce the risk of accidental snags or tears in the fabric.
At this point, your golf shirt will be marked and cut to the new desired length. You can now proceed with the next steps of the hemming process, such as folding up the hem, securing it with pins, and sewing or using alternative methods like iron-on hem tape.
Golf Waste Management: Rain Delays and Cancellations
You may want to see also
Explore related products
$14.39 $22.49
$23.19 $28.99
Cutting the shirt
To cut the shirt, the first step is to decide how short you want it to be. You can do this by putting the shirt on inside out and marking where you want the new hem to be. You can use dressmaker's chalk, a dressmaker's pen, or a sewing pin to do this.
If you want to be extra neat, you can then draw a line using chalk or a pen, measuring up from the bottom edge of the shirt as you draw. This will ensure that the shirt will be the same length all around.
Now, you can cut the shirt. Cut the shirt 1/2 inch longer than the desired length. Use fabric scissors to trim along a parallel line that is 1/2 inch farther down from your newly marked hemline. The excess will be folded over. Make sure to cut the shirt evenly all around.
Golf's Dark History: Conquistadors and Their Theft of the Sport
You may want to see also
Explore related products
$19.99 $24.99
$25.99 $32.99
Folding the hem
To begin the process of hemming a golf shirt, you should first put the shirt on and turn it inside out. This will allow you to determine the desired length of the shirt. You can then mark the new hemline with a dressmaker's chalk or pen. If you want to be extra precise, you can use a ruler to measure up from the bottom edge of the shirt as you draw the line.
Once you have marked the new hemline, it is important to cut the shirt slightly longer than the desired length, usually about half an inch longer. This will give you enough fabric to fold under and create a neat hem. After cutting the shirt, you can begin the process of folding the hem.
Take the bottom hem and fold it up by half an inch. This fold will create the new hem and ensure that the shirt is the exact length you want it to be. You don't have to worry about finishing the raw edge, as T-shirt material does not fray easily. However, if you want a neater finish on the inside, you can serge or zigzag stitch the raw edge.
After folding the hem, you can press it flat with an iron. Make sure to use a heat setting that is safe for the fabric of your shirt. Ironing the hem will give it a crisp edge and help set the fold in place. At this point, you can secure the hem with sewing pins if you plan to sew it by hand or with a machine.
If you are using iron-on hem tape, you can place it inside the fold before ironing. Follow the instructions on the package, and be sure to iron over the hem evenly to secure it in place. Whether you are sewing the hem or using iron-on tape, the folding process remains the same.
Golf Racing: Stage 2 Modifications Explored
You may want to see also
Explore related products
$14.99 $22.99
$14.34
Sewing the hem
Take the shirt off and lay it flat on a table. Measure a line across the bottom of the shirt, exactly half an inch longer than your previous mark. Cut along this line. This half-inch fold will be used to create the new hem. Fold the bottom of the shirt up by half an inch, so that the shirt is now the exact length you want it to be.
At this point, you can press the hem flat with an iron. Make sure you use a heat setting that is safe for the material. This will give your shirt a crisp edge all along the bottom. Secure the hem with sewing pins. If you don't have a sewing machine, you can use iron-on hem tape to secure the hem. Simply slip the tape inside the fold and iron over it, following the instructions on the package.
Now, you can start sewing. Choose a thread colour that matches your shirt, or go with a unique colour for a bolder look. You can sew your new hem by hand, but this will take longer and require more focus. Sewing machines make the process much faster, and they can also create a more uniform line. Select a hemstitch on your machine—a zigzag stitch or a stretch stitch will create a hemline with some stretch. Sew as close to the raw edge as you can, removing each pin as you go. Work your way around the entire shirt, then snip off any loose threads.
Kevin Kisner: Retirement or Golfing Glory?
You may want to see also
Explore related products
$24.99
$19.12 $24.99
Ironing the hem
Prepare the Fabric
Before ironing, ensure that the golf shirt is turned inside out. This allows you to work on the hem easily without any interference from the outer layer. Place the shirt on a flat surface, preferably an ironing board, to create a smooth and even surface for ironing.
Fold the Hem
Determine the desired length of the shirt by marking the new hemline with dressmaker's chalk or a pen. Cut the fabric along this marked line, ensuring that you cut it straight and evenly. Then, fold up the bottom hem by about half an inch (1.27 centimeters). This fold creates the desired length of the shirt and forms the inside of the hem.
Press with an Iron
Lay the shirt flat on the ironing board and press down on the folded hem with an iron. Ensure that you use the appropriate heat setting for the fabric type to avoid any damage. Run the iron along the hem edge to create a crisp and smooth finish. This step helps to set the fold in place and create a neat appearance.
Secure the Hem
Use sewing pins to secure the hem in place. Insert the pins through the front and back of the fabric, perpendicular to the hem edge, to hold it securely. This step ensures that the hem remains in place while you sew it or apply any other finishing techniques.
Iron-on Hem Tape (Optional)
If you are using iron-on hem tape, unfold the edge of the shirt's hem and place the tape inside. The tape should be cut to the precise width needed for full coverage. Then, fold the shirt over and press with the iron, following the instructions on the tape packaging.
Golfing While Pregnant: Is It Safe?
You may want to see also
Frequently asked questions
The first step is to turn the shirt inside out and determine the desired length of the shirt. You can put the shirt on inside out and mark the new length with a dressmaker's chalk, pen, or sewing pin.
Cut the shirt about half an inch longer than the desired length. Then, fold the hem up by half an inch, which will give you the exact length you want.
Yes, you can sew the hem by hand or using a sewing machine. Sewing by hand may be a good exercise for beginners, but using a sewing machine will give you a more professional finish.
A zigzag stitch or a stretch stitch is recommended for sewing hems. Sew as close to the raw edge as possible, and remove pins as you sew.
Yes, you can use iron-on hem tape as a quick and easy alternative to sewing. Simply iron over the hem following the instructions on the package.
