Stop Breaking Tees: Master Your Golf Swing

how to stop breaking golf tees

Golfers frequently break tees, and while this may be due to poor-quality tees, it can also indicate a misplaced tee or a problem with your stance or swing. If you're tired of constantly breaking your tees and want to improve your game, there are several strategies you can employ. Firstly, consider switching to plastic tees, which are more durable than wooden ones. Secondly, ensure that your tee height is correct, as a tee that is too high off the ground is more likely to break. Additionally, examine your swing and stance; a steep swing where you hit down on the ball instead of through it can lead to broken tees. To correct this, try widening your stance, placing the ball off your left heel, and tilting your spine away from the target. Finally, ground conditions can also contribute to broken tees, so be mindful of the firmness of the ground and consider using shorter tees that don't penetrate the ground as deeply.

shungolf

Avoid using long tees in hard ground

Golfers often struggle with broken tees, and while this is sometimes due to their stance or swing, it can also be caused by the length of the tee and the hardness of the ground.

When a long tee is pushed deep into hard ground, it is almost guaranteed to break. The ground on golf courses is usually watered and maintained, so it is softer than regular ground, and tees are less likely to break. However, if the ground is too firm, it becomes difficult for the tee to flex, and it will likely snap when you try to pull it out.

To avoid this, it is advisable to use a shorter tee. This way, only a small portion of the tee is inserted into the ground, reducing the likelihood of breakage. Another option is to put the tee in the ground, take it out, and then put it back in. This loosens the tee in the ground, making it easier to remove and less likely to break.

In addition to tee length and ground hardness, the type of tee also matters. Plastic tees are more durable than wooden ones, which tend to dry out, become brittle, and break easily. Bamboo tees are also more resilient than wooden ones. Therefore, opting for plastic or bamboo tees can help reduce breakage.

By following these suggestions, golfers can minimize the number of broken tees due to hard ground and make their golfing experience more enjoyable and cost-effective.

shungolf

Widen your stance and adjust your swing

One of the most common reasons for breaking tees is a steep swing. This means that instead of hitting through the ball, you are hitting down on it. This can also cause you to lose yards on your drive. To prevent this, you should widen your stance.

Widening your stance will help to shallow out your swing, which will benefit your game in a number of ways. When taking your stance, your feet should be about shoulder-width apart. The inside of your feet should align with the outside of your shoulders. You can add another inch or so when using long irons or fairway woods.

You should also make sure that your knees are slightly flexed and your weight is evenly distributed between your feet. This will help you to maintain your balance throughout the swing.

In addition to widening your stance, you should also move the ball forward. Place the ball just inside your front heel. This will help you to avoid hitting down on the ball.

Another way to improve your swing is to practice visualisation. Before playing, go to the driving range and imagine your shot in your mind. Picture where you want the ball to fly from start to finish. This will help you to avoid swinging down on the ball.

Golf App V1: Free or Fee?

You may want to see also

shungolf

Use plastic tees

While wooden tees are the classic golf tee, they are prone to breaking. Plastic tees are a more durable alternative, and one bag can last for years. They are also more flexible than wooden tees, which means they are less likely to break.

There are several types of plastic tees to choose from. The most common type is the plastic step-down tee, which helps improve consistency with your tee shots. The ball will always be at the exact same height, with the ball sitting approximately 1/2", 3/4", 1", or 1 1/2" above the ground.

Another option is the brush tee, where the golf ball sits on top of some plastic fibers, creating almost no resistance. Zero friction models are available, which reduce the resistance of the golf ball when it leaves the tee.

When choosing a plastic tee, it is important to consider the height of your driver. The bigger it is, the longer the tee you will need. Purchasing tees up to 4 inches in height will allow you to get your driver's face lined up exactly with the golf ball.

While plastic tees are more durable than wooden tees, they are not without their drawbacks. Once they break, they create waste that is harmful to the environment.

Super Speed Golf: Does It Work?

You may want to see also

shungolf

Adjust your tee height

Adjusting your tee height is an important step in preventing broken tees. The height of your tee should be chosen based on the club head size, ensuring that half of your golf ball is above the club head when teeing off with a driver. This will allow the top of the driver club head to go through the middle of the golf ball, reducing the chances of breaking the tee.

It is important to note that if your tee height is too high, it can increase the likelihood of breakage. Therefore, it is recommended to use shorter tees that barely stick into the ground. This will reduce the force exerted on the tee when taking a shot. Additionally, you can try placing the tee in the ground, taking it out, and then putting it back in to loosen the ground around it.

The type of tee you use also plays a role in preventing breakage. Plastic tees, for example, are more durable than wooden tees and are less likely to break. Bamboo tees are also mentioned as being more resilient than wooden ones.

While adjusting the tee height is crucial, it is also important to consider your swing and stance. A steep swing can contribute to breaking tees, as it causes you to hit down on the ball instead of through it. By widening your stance, placing the ball off your left heel, and shifting your spine to face away from the target, you can shallow out your swing and reduce the chances of breaking your tee.

In summary, to prevent breaking golf tees, it is essential to adjust the tee height appropriately, choose the right type of tee, and be mindful of your swing and stance. By making these adjustments, you can improve your game and reduce the frustration of constantly breaking tees.

shungolf

Try visualisation techniques

Visualisation techniques can be an effective strategy to improve your drive and prevent broken tees. Here are some tips to try:

Firstly, it is important to find a target on the range and select the appropriate club for the distance to that target. Next, imagine the shot in your mind; picture where you want the ball to go from start to finish. You can visualise this by watching the "protracer" on TV during PGA TOUR events. Instead of focusing on driving the ball as far as possible, imagine driving it up and over a line of trees. This will help prevent a steep swing, which is often the cause of broken tees. A steep swing can cause you to hit down on the ball, which can lead to broken tees and a loss of desired yards.

Practising visualisation techniques on the driving range before playing can be an excellent way to improve your drive and reduce tee breakage. Once you have visualised the shot, take your swing and compare the outcome to what you imagined. Repeat this process as many times as you like to refine your technique and improve your accuracy.

Why Golf is Not a Boring Sport

You may want to see also

Frequently asked questions

There are several factors that can cause golf tees to break. Firstly, the type of tee you use matters. Wooden tees are more likely to break than plastic tees, and old tees are more likely to break than new ones. Bamboo tees are more resilient than wood. If you are using a long tee, stick it only slightly into the ground, as firm ground can cause tees to break.

If your swing is too steep, you are more likely to break tees because you will be hitting down on the ball. To prevent this, widen your stance, place the ball off your left heel, and shift your spine so you face away from your target.

Practising visualisation on the driving range can help you adjust your swing and prevent breaking tees. You can also try using adjustable tees to ensure you have the correct tee height for your driver.

Written by
Reviewed by

Explore related products

Share this post
Print
Did this article help you?

Leave a comment